[Ukfreebsd] Beri dmesg

Robert N. M. Watson rwatson at FreeBSD.org
Sat Jun 20 22:03:52 BST 2015


The below is not quite stock FreeBSD booting on BERI — it’s CHERI-extended FreeBSD (CheriBSD). However, close enough for this purpose?

Robert

On 19 Jun 2015, at 06:39, Sevan / Venture37 <venture37 at gmail.com> wrote:
> 
> Hi,
> Anyone able to post a copy of the dmesg from the Beri tablet? Had a
> chance to play with one yesterday but didn't have any means of saving
> a copy there & then.
> 
> It'd make a nice addition to the ones on http://dmesgd.nycbug.org/index.cgi
> 
> 
> Sevan / Venture37
> _______________________________________________
> Ukfreebsd mailing list
> Ukfreebsd at uk.freebsd.org
> http://mailman.uk.freebsd.org/mailman/listinfo/ukfreebsd
> UK BSD Groups http://www.bsdgroups.org.uk
> Hosted by EXOnetric http://www.exonetric.net

Consoles: altera jtag uart  
main(0, 0x90000000400004e0, 0x90000000400004e8, 0x980000000010a910 (0x3eeffc00))

FreeBSD/mips BERI loader, Revision 0.1
(rnw24 at zenith.cl.cam.ac.uk, Tue Apr 29 15:27:36 BST 2014)
-
/boot/kernel/kernel data=0x657e00+0x128ef0 syms=[0x8+0x7a418+0x8+0x6e33a]
Hit [Enter] to boot immediately, or 1 2 3 sequence for command prompt.
Booting [/boot/kernel/kernel]...               
Kernel entry at 0xffffffff80100160
Kernel args: (null)
entry: platform_start()
Using FDT at 0xffffffff806c01c0 from kernel
cmd line: 
envp:
bootinfo found at 0x980000000004da70
memsize = 0x3eeffc00
Cache info:
  picache_stride    = 4096
  picache_loopcount = 4
  pdcache_stride    = 4096
  pdcache_loopcount = 4
cpu0: Unknown cid 0 processor v0.4
  MMU: Standard TLB, 144 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: direct-mapped with 128 sets, 128 bytes per line
  L1 d-cache: direct-mapped with 128 sets, 128 bytes per line
  Config1=0x9e703848<COP2,WatchRegs>
  Config3=0x80002000
Physical memory chunk(s):
0x881000 - 0x3eefffff, 1046999040 bytes (255615 pages)
Maxmem is 0x3ef00000
pcpu is available at virtual address 0xc000000000000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
platform_cpu_mask: hardware has 1 cores with 1 threads each
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #40 36225f5(master)-dirty: Sat Jun 20 14:11:57 UTC 2015
    rnw24 at vica.cl.cam.ac.uk:/home/rnw24/obj/mips.mips64/home/rnw24/git/cheribsd/sys/CHERI_DE4_USBROOT mips
gcc version 4.2.1 20070831 patched [FreeBSD]
VT: init without driver.
module_register: module atse/miibus already exists!
Module atse/miibus failed to register: 17
real memory  = 1055916032 (1031168K bytes)
Physical memory chunk(s):
0x009a2000 - 0x3d564fff, 1018966016 bytes (248771 pages)
avail memory = 1013612544 (966MB)
CHERI: compiled for 256-bit capabilities
ULE: setup cpu 0
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus (BERI version)> on ofwbus0
beripic0: <BERI Programmable Interrupt Controller> mem 0x7f804000-0x7f8043ff,0x7f806000-0x7f80600f,0x7f806080-0x7f80608f,0x7f806100-0x7f80610f irq 0,1,2,3,4 on simplebus0
beripic0: config region at mem 0x7f804000-0x7f804400
beripic0: IP read region at mem 0x7f806000-0x7f806010
beripic0: IP set region at mem 0x7f806080-0x7f806090
beripic0: IP clear region at mem 0x7f806100-0x7f806110
simplebus0: no default resources for rid = 5, type = 1
beripic0: 64 hard and 64 soft sources
beripic0: initial config: src 0: enabled tid: 0 hardintr 1
beripic0: initial config: src 1: enabled tid: 0 hardintr 2
beripic0: initial config: src 2: enabled tid: 0 hardintr 3
beripic0: initial config: src 5: enabled tid: 0 hardintr 1
beripic0: initial config: src 6: enabled tid: 0 hardintr 0
beripic0: initial config: src 11: enabled tid: 0 hardintr 4
beripic0: initial config: src 12: enabled tid: 0 hardintr 0
uart0: <16550 or compatible> mem 0x7f002100-0x7f00211f irq 6 (beripic0) on simplebus0
beripic0: mapping pin 6 to irq 0, tid 0
uart0: fast interrupt
altera_jtag_uart0: <Altera JTAG UART> mem 0x7f000000-0x7f00003f irq 0 (beripic0) on simplebus0
beripic0: mapping pin 0 to irq 1, tid 0
altera_jtag_uart1: <Altera JTAG UART> mem 0x7f001000-0x7f00103f on simplebus0
simplebus0: no default resources for rid = 0, type = 1
altera_jtag_uart1: IRQ unavailable; selecting polled operation
altera_jtag_uart2: <Altera JTAG UART> mem 0x7f002000-0x7f00203f on simplebus0
simplebus0: no default resources for rid = 0, type = 1
altera_jtag_uart2: IRQ unavailable; selecting polled operation
altera_sdcardc0: <Altera Secure Data Card IP Core> mem 0x7f008000-0x7f0083ff on simplebus0
altera_sdcardc0: 2021M SD Card inserted
terasic_de4led0: <Terasic DE4 8-element LED> mem 0x7f006000 on simplebus0
cfi0: <Intel/Sharp - 64MB> mem 0x74000000-0x77ffffff on simplebus0
cfi0: [4x32KB,511x128KB]
cfid0 on cfi0
atse0: <Altera Triple-Speed Ethernet MegaCore> mem 0x7f007000-0x7f0073ff,0x7f007500-0x7f007507,0x7f007520-0x7f00753f,0x7f007400-0x7f007407,0x7f007420-0x7f00743f irq 1,2 (beripic0) on simplebus0
atse0: MAC ctrl region at mem 0x7f007000-0x7f007400
atse0: RX FIFO at mem 0x7f007500-0x7f007508
atse0: RXC FIFO at mem 0x7f007520-0x7f007540
atse0: TX FIFO at mem 0x7f007400-0x7f007408
atse0: TXC FIFO at mem 0x7f007420-0x7f007440
miibus0: <MII bus> on atse0
e1000phy4: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy4: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
atse0: bpf attached
atse0: Ethernet address: b6:a5:d1:d2:d2:85
beripic0: mapping pin 1 to irq 2, tid 0
beripic0: mapping pin 2 to irq 3, tid 0
atse1: <Altera Triple-Speed Ethernet MegaCore> mem 0x7f005000-0x7f0053ff,0x7f005500-0x7f005507,0x7f005520-0x7f00553f,0x7f005400-0x7f005407,0x7f005420-0x7f00543f irq 11,12 (beripic0) on simplebus0
atse1: MAC ctrl region at mem 0x7f005000-0x7f005400
atse1: RX FIFO at mem 0x7f005500-0x7f005508
atse1: RXC FIFO at mem 0x7f005520-0x7f005540
atse1: TX FIFO at mem 0x7f005400-0x7f005408
atse1: TXC FIFO at mem 0x7f005420-0x7f005440
atse1: Ethernet address not meeting our multi-MAC standards. Falling back to random hadware address.
miibus1: <MII bus> on atse1
e1000phy5: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy5: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy5:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
atse1: bpf attached
atse1: Ethernet address: 9e:19:c4:bf:57:e3
beripic0: mapping pin 11 to irq 4, tid 0
beripic0: mapping pin 12 to irq 0, tid 0
terasic_mtl0: <Terasic Multi-touch LCD (MTL)> mem 0x70400000-0x70400fff,0x70000000-0x70176fff,0x70177000-0x70178fff on simplebus0
terasic_mtl0: registers at mem 0x70400000-0x70401000
terasic_mtl0: pixel frame buffer at mem 0x70000000-0x70177000
terasic_mtl0: text frame buffer at mem 0x70177000-0x70179000
terasic_mtl0: rejecting invalid panel params width=800 height=480
terasic_mtl0: using default panel params
fbd0 on terasic_mtl0
VT: initialize with new VT driver "fb".
saf1761otg0: <ISP1761/SAF1761 DCI USB 2.0 Device Controller> mem 0x7f100000-0x7f13ffff,0x7f140000-0x7f140003 irq 4,5 (beripic0) on simplebus0
beripic0: mapping pin 5 to irq 1, tid 0
usbus0 on saf1761otg0
saf1761otg0: usbpf: Attached
altera_avgen0: <Generic Altera Avalon device attachment> mem 0x7f009000-0x7f009001 on simplebus0
berirom0: <BERI build information ROM> mem 0x7f00a000-0x7f00afff on simplebus0
berirom0: Built on 2015-06-10 at 13:36:14 (1433943374)
berirom0: SVN revision: r18953
altera_avgen1: <Generic Altera Avalon device attachment> mem 0x7f00c000-0x7f00c007 on simplebus0
altera_avgen2: <Generic Altera Avalon device attachment> mem 0x7f00b080 on simplebus0
altera_avgen3: <Generic Altera Avalon device attachment> mem 0x7f00b000-0x7f00b007 on simplebus0
altpll0: <Altera reconfigurable PLL> mem 0x7f00e000-0x7f00efff on simplebus0
altpll0: registers at mem 0x7f00e000-0x7f00f000
pixelstream0: <Pixelstream HDMI> mem 0x7f00d000-0x7f00d027 on simplebus0
pixelstream0: registers at mem 0x7f00d000-0x7f00d028
pixelstream0: pixelstream vt(4) not selected by kern.vt.driver tunable
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 100000000 Hz quality 800
Event timer "MIPS32" frequency 100000000 Hz quality 800
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
Device configuration finished.
Timecounters tick every 5.000 msec
crypto: <crypto device>
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
GEOM: new disk altera_sdcard0
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
MAP: No valid partition found at altera_sdcard0
ugen0.1: <NXP> at usbus0
uhub0: <NXP DCI Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
random: unblocking device.
uhub0: 2 ports with 2 removable, self powered
cfid0: slice 00000000-0001ffff: config (127KB)
cfid0: slice 00020000-00c1ffff: fpga0 (12287KB)
cfid0: slice 00c20000-0181ffff: fpga1 (12287KB)
cfid0: slice 01820000-03fdffff: os (40703KB)
cfid0: slice 03fe0000-03ffffff: boot (127KB)
MAP: No valid partition found at cfid0
MAP: No valid partition found at cfid0s.config
MAP: cfid0s.fpga0: 0xc00000, data=0xc00000 "/dev/map/fpga"
MAP: No valid partition found at cfid0s.fpga1
MAP: cfid0s.os: 7e0000x1800000, data=0x1800000 "/dev/map/kernel"
ugen0.2: <Philips Semiconductors> at usbus0
uhub1: <Philips Semiconductors ISP1520, class 9/0, rev 2.00/0.00, addr 2> on usbus0
MAP: No valid partition found at cfid0s.boot
Root mount waiting for: usbus0
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <Kingston> at usbus0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:0:0: Attached to scbus0
Trying to mount root from ufs:/dev/da0 []...
mountroot: waiting for device /dev/da0 ...
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SPC-2 SCSI device
pass0: Serial Number 001A4D5E84E6FE41594EB6EF
pass0: 40.000MB/s transfers
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 001A4D5E84E6FE41594EB6EF
da0: 40.000MB/s transfers
da0: 59006MB (120845300 512 byte sectors: 255H 63S/T 7522C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
da0: Delete methods: <NONE(*)>
GEOM: new disk da0
MAP: No valid partition found at da0
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Setting hostuuid: edc4300a-f6e6-11e3-92f6-c5285a7fac82.
Setting hostid: 0xb5ab46a9.
No suitable dump device was found.
Starting file system checks:
/dev/da0: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0: clean, 59315721 free (553 frags, 7414396 blocks, 0.0% fragmentation)
MAP: No valid partition found at da0
/dev/altera_sdcard0: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/altera_sdcard0: clean, 1365922 free (266 frags, 170707 blocks, 0.0% fragmentation)
MAP: No valid partition found at altera_sdcard0
Mounting local file systems:.
Writing entropy file:.
Setting hostname: beri1.
atse0: link state changed to DOWN
atse0: link state changed to UP
atse1: link state changed to DOWN
Starting Network: lo0 atse0 atse1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
        inet 127.0.0.1 netmask 0xff000000 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
atse0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80048<VLAN_MTU,POLLING,LINKSTATE>
        ether b6:a5:d1:d2:d2:85
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
atse1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80048<VLAN_MTU,POLLING,LINKSTATE>
        ether 62:30:56:af:33:12
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (none)
        status: no carrier
Starting devd.
Starting dhclient.
DHCPREQUEST on atse0 to 255.255.255.255 port 67
ip length 339 disagrees with bytes received 341.
accepting packet with data after udp payload.
DHCPACK from 128.232.18.7
bound to 128.232.18.71 -- renewal in 18000 seconds.
Starting pflogd: 
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
MAP: No valid partition found at md0
MAP: No valid partition found at md0
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring syscons: blanktime.
Performing sanity check on sshd configuration.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting sshd.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting cron.
Starting de4_hdmi.

Starting background file system checks in 60 seconds.

atse0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80048<VLAN_MTU,POLLING,LINKSTATE>
        ether b6:a5:d1:d2:d2:85
        inet 128.232.18.71 netmask 0xffffff00 broadcast 128.232.18.255 
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

Wed Dec 31 03:29:01 UTC 2014

FreeBSD/mips (beri1) (ttyj0)

login: 




More information about the Ukfreebsd mailing list