FreeBSD-4.7-RELEASE and a sis 900 nic

Andrew andrew.hodgson at blueyonder.co.uk
Sat Mar 22 18:55:20 GMT 2003


> Ok that stopped the error coming up. But got another one something about
> not be able to map memory or port.  The card is a built on card.


OK, can I see the relevant output from dmesg?

Thanks,
Andrew



> 
> -----Original Message-----
> From: Andrew [mailto:andrew.hodgson at blueyonder.co.uk] 
> Sent: 22 March 2003 18:15
> To: David Richards
> Subject: Re: FreeBSD-4.7-RELEASE and a sis 900 nic
> 
> 
> Could be the IRQ - have you checked for conflicts? Is it switchable iin
> the BIOS? It might be worth toggling 'Plug n Play OS' from 'yes' to 'no'
> (or
> vice-versa) in the BIOS. Failing that put the card on another PCI slot
> and see if it works - this is just my experience, I hope you can fiind
> the answer! Best wishes, Andrew
> 
> ----- Original Message -----
> From: "David Richards" <davidr at skyforge.net>
> To: <freebsd-users at uk.freebsd.org>
> Sent: Saturday, March 22, 2003 5:51 PM
> Subject: FreeBSD-4.7-RELEASE and a sis 900 nic
> 
> 
> > Hi all
> >      I am having trouble getting my network card to work. It is a sis 
> > 900 based card.
> >
> > I get the following messages when I Boot up
> >
> > sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem 
> > 0xee000000-0xee000fff irq 5 at device 3.0 on pci0
> > sis0: Ethernet address: 00:e0:18:ab:17:b8
> > sis0: MII without any PHY!
> > device_probe_and_attach: sis0 attach returned 6
> >
> >
> > I have recompiled my kernel to add
> >
> > device miibus
> > device sis
> >
> >
> > And I still get the errors and unable to configure it.
> >
> > Any idea ?
> >
> >
> > david
> >
> >
> > ------ FreeBSD UK Users' Group  -  Mailing List ------ 
> > http://listserver.uk.freebsd.org/mailman/listinfo/freebsd-users
> 
> 
> ------ FreeBSD UK Users' Group  -  Mailing List ------
> http://listserver.uk.freebsd.org/mailman/listinfo/freebsd-users





More information about the Ukfreebsd mailing list