Tried an Asus Terminator, anyone?

Sam Smith S at mSmith.net
Wed Jan 23 18:35:23 GMT 2002


On Wed, 23 Jan 2002, Ian Pallfreeman wrote:
> Have any of you good folk tried FreeBSD on an ASUS Terminator? If so, do the
> onboard ethernet and sound work? I presume everything else does.

Yes.

I use one as my main desktop box. The on board video isn't great
(1024x768 at 50Hz) but everything works. I'd recommend them.

There's not much space for expansion, but you don't need that much.

If you want me to mail you a FBSD dmesg, let me know.



Sam



OpenBSD dmesg follows:


OpenBSD 3.0-current (GENERIC) #1: Fri Dec 28 23:13:52 GMT 2001
    root at sebastian:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class, 128KB L2 cache) 733 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 1056468992 (1031708K)
avail mem = 974655488 (951812K)
using 5689 buffers containing 52924416 bytes (51684K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(96) BIOS, date 06/07/01, BIOS32 rev. 0 @ 0xf0f30
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1542
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf14d0/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 630 Host-PCI" rev 0x21
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 4D040H2>
wd0: 16-sector PIO, LBA, 39083MB, 16383 cyl, 16 head, 63 sec, 80043264 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, CD-S500/A, 1.4K> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x83: irq 5 address 00:e0:18:2b:5a:df
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000760, model 0x0000, rev. 0
ohci0 at pci0 dev 1 function 2 "SIS 5597/5598 USB" rev 0x07: irq 9, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 1 function 3 "SIS 5597/5598 USB" rev 0x07: irq 9, OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
autri0 at pci0 dev 1 function 4 "SIS Trident 4D WAVE" rev 0x02: irq 10
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x21
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 14 function 0 "Realtek 8139" rev 0x10: irq 10 address 00:d0:70:01:a1:11
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4240 netmask 4660 ttymask 56e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub0 port 2 configuration 1 interface 0ugen0 at uhub1 port 2
umass0: M-Systems DiskOnKey, rev 1.00/2.00, addr 2
umass0: using SCSI over BBB-P
umass0: Get Max Lun failed: IOERROR
umass0: unable to get Max Lun: IOERROR

ugen0: USB-RS232 Interface Converter USB Ver1.1 Device, rev 1.10/1.02, addr 2
umass0: at uhub0 port 2 (addr 2) disconnected
umass0 detached
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: M-Systems DiskOnKey, rev 1.00/2.00, addr 2
umass0: using SCSI over BBB-P
umass0: Get Max Lun failed: IOERROR
umass0: unable to get Max Lun: IOERROR
umass0: at uhub0 port 2 (addr 2) disconnected
umass0 detached
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: M-Systems DiskOnKey, rev 1.00/2.00, addr 2
umass0: using SCSI over BBB-P
umass0: Get Max Lun failed: IOERROR
umass0: unable to get Max Lun: IOERROR
umass0: at uhub0 port 2 (addr 2) disconnected
umass0 detached

-- 
  Idiocy: Never Underestimate the Power of Stupid People in Large Groups





More information about the Ukfreebsd mailing list