getting a scsi cdburner to work
dan.c at chimmi.freeserve.co.uk
Sun Feb 17 13:51:31 GMT 2002
im struggling a bit here to get this cdburner working under fbsd 4.5.
the machine is a dell poweredge 2300 which has two scsi cards in, 1 for the
disks and 1 for the tape,normal cd and cdburner.
everything is picked up at boot,below is the cdburner pickup
cd0 at ahc1 bus 0 target 4 lun 0
cd0: <PHILIPS CDD2600 1.07> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Logical unit not ready,
cause not reportable
now after following Dan Langille's cdburner howto, i do the
cdrecord -scanbus option to see what is where, but thats the problem..
root at wolverine:/root -> cdrecord -scanbus
Cdrecord 1.10 (i386-unknown-freebsd4.5) Copyright (C) 1995-2001 Jörg
Using libscg version 'schily-0.5'
0,0,0 0) 'SEAGATE ' 'ST318203LC ' '0001' Disk
0,1,0 1) 'SEAGATE ' 'ST318203LSUN18G ' '034A' Disk
0,2,0 2) *
0,3,0 3) 'FUJITSU ' 'MAG3182L SUN18G ' '1111' Disk
0,4,0 4) *
0,5,0 5) 'SEAGATE ' 'ST318203LSUN18G ' '034A' Disk
0,6,0 6) *
0,7,0 7) *
root at wolverine:/root ->
it seems that its only seeing the scsi card that has all the disks attached
is there any way i can tell it to use both cards for scanning?
Many thanks for your help
More information about the Ukfreebsd