Jadetec micro PC

Robin Melville robmel at innotts.co.uk
Fri Feb 8 11:30:09 GMT 2002

Dear all

I just bought a Jadetec microPC (turns out to be a rebadged EZgo) to 
replace an old K6 for development and taking to database/web demos. 
(It's really small but with a strangely noisy fan)

This is a 1.1 GHz PIII on a 133MHz bus. Strangely, it seems to run 
hardly any faster than the K6 did, and there's an eerie delay between 
typing a command and it happening.

Has anybody set up FreeBSD on this machine, or have any tips as to 
how to make it run at a reasonable speed?

Many thanks,


Robin Melville, Addiction Information Services
Nottingham Alcohol & Drug Team
work: robmel at nadt.org.uk        http://www.nadt.org.uk/
home: robmel at innotts.co.uk	http://www.innotts.co.uk/~robmel


Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Thu Feb  7 23:59:44 GMT 2002
     root at jade.highwire.local:/usr/obj/usr/src/sys/jade
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1001.78-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
real memory  = 267255808 (260992K bytes)
avail memory = 256528384 (250516K bytes)
Preloaded elf kernel "kernel" at 0xc0383000.
VESA: v2.0, 1024k memory, flags:0x1, mode table:0xc0314682 (1000022)
VESA: Intel810(TM) Graphics Chip Accelerated VGA BIOS
Pentium Pro MTRR support enabled
Using $PIR table, 1 entries at 0xc00f7180
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 9
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem 
0xefdfff00-0xefdfffff irq 11 at device 6.0 on pci1
rl0: Ethernet address: 00:03:5c:d2:01:b9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xff00-0xff0f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xc800-0xc81f irq 10 
at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801AA (ICH) SMBus controller> port 0x540-0x54f irq 
11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 
0xd000-0xd03f,0xd400-0xd4ff irq 11 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2416) at 31.6 irq 11
eisa0: <EISA bus> on motherboard
eisa0: unknown card FP at 0000 (0x1a000000) at slot 9
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA66
acd0: DVD-ROM <MATSHITADVD-ROM SR-8175> at ata1-master using PIO4


machine         "i386"
cpu             "I686_CPU"
ident           jade
maxusers        96

options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         NETATALK                #Appletalk communications protocols

options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         MFS                     #Memory Filesystem
options         NFS                     #Network Filesystem
options         MSDOSFS                 #MSDOS Filesystem
options         "CD9660"                #ISO 9660 Filesystem
#options                PROCFS                  #Process filesystem

options         "COMPAT_43"             #Compatible with BSD 4.3 [KEEP THIS!]
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         SYSVSHM
options         SYSVMSG
options         SYSVSEM
options         P1003_1B                #Posix P1003_1B real-time extentions
options         SOFTUPDATES
options         IPSEC                   #IP security
options         IPSEC_ESP               #IP security (crypto; define w/ IPSEC)

# PCI & disk drivers
device  isa
device eisa
device  pci

device          ata
device          atadisk         # ATA disk drives
device          atapicd         # ATAPI CDROM drives
options         ATA_STATIC_ID           #Static device numbering

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1
device          psm0    at atkbdc? irq 12

device          vga0    at isa?
options "VESA"

device smbus
device ichsmb
device apm

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa?

# splash screen/screen saver
pseudo-device   splash

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

#serial ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          ppi             # Parallel port interface device

device miibus
device          rl

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          uscanner        # Scanners
device          urio            # Diamond Rio MP3 Player

pseudo-device   loop
pseudo-device   ether
pseudo-device   tun     2
pseudo-device   pty     40
pseudo-device   gzip            # Exec gzipped a.out's

pseudo-device   bpf 4   #Berkeley packet filter
pseudo-device   speaker         #Play IBM BASIC-style noises out your speaker

More information about the Ukfreebsd mailing list