pptp chap81 out of the frying pan...

[Stuart Henderson]

hmm, that has chap81 working, but MPPE won't sync, like this:

20:42:41 IPCP: deflink: LayerUp.
20:42:41 IPCP: myaddr 10.2.0.199 hisaddr = 10.2.0.240
20:42:41 Phase: Found interface dc0 for 10.2.0.240
20:42:41 CCP: deflink: RecvConfigReq(3) state = Ack-Rcvd
20:42:41 CCP:  MPPE[6] value 0x01000020 (40 bits, stateless)
20:42:41 CCP: deflink: SendConfigAck(3) state = Ack-Rcvd
20:42:42 CCP:  MPPE[6] value 0x01000020 (40 bits, stateless)
20:42:42 CCP: deflink: State change Ack-Rcvd --> Opened
20:42:42 CCP: deflink: LayerUp.
20:42:42 CCP: MPPE: Input channel initiated
20:42:42 CCP: MPPE: Output channel initiated
20:42:42 CCP: deflink: Out = MPPE[18], In = MPPE[18]
20:42:42 LCP: Reducing MTU from 1500 to 1498 (CCP requirement)
20:42:43 CCP: MPPEInput: Packet without MPPE_FLUSHED set in stateless mode
20:42:43 Phase: Unknown protocol 0x7871 (unrecognised protocol)
20:42:43 LCP: deflink: SendProtocolRej(2) state = Opened
20:42:46 CCP: MPPEInput: Packet without MPPE_FLUSHED set in stateless mode
20:42:46 Phase: Unknown protocol 0xeaac (unrecognised protocol)
20:42:46 LCP: deflink: SendProtocolRej(2) state = Opened
20:42:49 CCP: MPPEInput: Packet without MPPE_FLUSHED set in stateless mode
20:42:49 Phase: Unknown protocol 0xb8cb (unrecognised protocol)
20:42:49 LCP: deflink: SendProtocolRej(2) state = Opened
20:43:01 CCP: MPPEInput: Packet without MPPE_FLUSHED set in stateless mode
[...]

It's not a big problem for this application to run cleartext if need be.
-Stu