Lucent wavelan giving wi0: watchdog timeout

[Roger McCalman]

On Mon, Jul 16, 2001 at 02:28:40PM +0100, Brian Somers wrote:
> > wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 5 slot 0 on pccard0
> > wi0: Ethernet address: 00:02:2d:29:d6:e5
> > wi0: watchdog timeout
> > wi0: watchdog timeout
> > 
> > Any help getting this working would save trailing a 30M cable from
> > the house to my temporary house (a mobile home in the garden).
> 
> This is usually due to a broken IRQ.  There has been talk recently 
> about the pcic code not allocating the IRQ as SHARABLE.  Your BIOS may 
> be sharing the IRQ with another device, but then when the pcic driver 
> intiialises, it fails -- either that or something is stealing irq 5 
> (perhaps you've got an unconfigured sound card or something ?).  I'd 
> suspect the latter as the former should result in the driver failing 
> to load.
> 
> You could try adding a line to /boot/loader.conf:
> 
> machdep.pccard.pcic_irq="N"
> 
> where N is some other IRQ.  It may help.  If it doesn't, it may be 
> worth asking on freebsd-mobile....

Thanks.

I have tried 2 irq's 9 and 11 but still the same results.

It still picks irq 5.

If its any help to anyone here is the dmesg output...


Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Fri Jul 13 22:10:11 BST 2001
    root at dev.local:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (650.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x621  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 402636800 (393200K bytes)
config> q
avail memory = 387338240 (378260K bytes)
Preloaded elf kernel "kernel" at 0xc045d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc045d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Lexar Media     SM-READER    , rev 1.00/0.01, addr 2
uscanner0: EPSON Perfection610  , rev 1.00/0.01, addr 3
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip2: <VIA 82C686 AC97 Audio> port 0xb000-0xb003,0xb400-0xb403,0xb800-0xb8ff irq 10 at device 4.5 on pci0
pcic-pci0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [pwr save][CSC parallel isa irq]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xdf800000-0xdf80007f irq 9 at device 13.0 on pci0
xl0: Ethernet address: 00:01:02:dc:95:33
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: management irq 11
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19536MB <ST320423A> [39693/16/63] at ata0-master UDMA66
ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-slave UDMA66
acd0: CDROM <CREATIVE CD5220> at ata1-master using PIO4
acd1: CD-RW <RICOH CD-R/RW MP7063A> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
module_register: module uhub/umass already exists!
linker_file_sysinit "umass.ko" failed to register! 17
ip_fw_ctl: invalid command
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 5 slot 0 on pccard0
wi0: Ethernet address: 00:02:2d:29:d6:e5
wi0: watchdog timeout
wi0: watchdog timeout