Newbie: Setting up PPP in 4.0 stable
tony at rothstein.co.uk
Wed Aug 16 12:09:38 BST 2000
When I do:
all seems fine (connection established, login accepted, dynamic IP address).
But I can't get PPP or Kernel PPP to dial up.
For PPP, my /etc/ppp/ppp.conf is:
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
set device /dev/cuaa1
# set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set login "TIMEOUT 5 login:-\\r-login: ppp word: netcom"
set timeout 120
set ifaddr 0 0
add default HISADDR
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
set phone 9,08450798888
set authname whatever1
set authkey whatever2
But when I do:
* dial netcom OR dial whatever1
For Kernel PPP my /etc/ppp/options file is:
ABORT 'NO CARRIER'
Lock and my /etc/ppp/dial.chat is:
but again, doing pppd /dev/cuaa1 115200 connect 'chat -f /etc/ppp/dial.chat' FREEBIE whatever1
Causes no dial-up, with an error msg that FREEBIE is unknown.
What am I doing wrong?
More information about the Ukfreebsd